PVE resin-manufacture,factory,supplier from China

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

MELLUTEL™ PCH200MS is a white or off-white powder, odorless, tasteless and non-toxic. Soluble in a mixture of cold water and organic solvents to form a transparent viscous solution.

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

Hydroxyethyl methyl cellulose (HEMC) is one of the most popular cellulose ethers.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

Hydroxyethyl methyl cellulose ether soluble in water and some organic solvents.  Can be dissolved in cold water, its highest concentration is determined only by viscosity, solubility changes with viscosity, the lower the viscosity, the greater the solubility.  Because the aqueous solution has surface active function, can be used as colloid protectant, emulsifier and dispersant, the highly concentrated aqueous solution of the product has special viscoelastic properties compared with the aqueous solution of other polymers, and its addition has the ability to improve the shape

ETON HPMC(Hydroxypropyl methyl cellulose) is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

Hydroxypropyl methyl cellulose (hpmc) is a non-ionic cellulose combined ether crafted from cotton and wood via alkalization, propylene oxide and methyl chloride etherification.

 Tile cement mortar is used to attach tiles on concrete or block walls.

This product is a multi～functional pharmaceutical excipient, which can be used as thickener, dispersant, emulsifier, film～forming agent, etc. As film coating and adhesive in oral solid preparations, it can significantly improve the stability and dissolution of drugs, and enhance the waterproof of tablets. It can also be used as a suspension aid in suspension, as a matrix material in ophthalmic preparations, as a skeleton material in hydrophilic gel skeleton sustained ～ release tablets and intragastric floating tablets.

Structural formulaOR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3(n～2)/2 Modified products   Type   ItemHPMCYT1YT100M YT100MN YT1365 YT150MSSpecification of non modified products                      TypeItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSNon surfacetreatmentPD100MPD150MPD200MPD300M/EM40MEM60MEM70MEM100MEM150MEM200MSurface treatmentPD100MSPD150MSPD200MSPK8000S PK100MS PK150MS PK200MSEM6000SEM8000SEM10MSEM20MSEM30MSEM60MSEM100MSEM150MSEM200MSGel temperature ℃58.0～64.070.0～90.070.0～90.0pH5.0～9.05.0～

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPMC is a multi-purpose medicinal material, can be used as thickener, dispersant, emulsifier and film-forming agent. Made in the drug tablet film coating, adhesive, can significantly improve the dissolution rate of drugs can enhance the waterproof tablets.

Hydroxypropyl Methyl Cellulose products have the maximum consumption in the area of suspension polymerization of vinyl chloride in China. In the suspension polymerization of vinyl chloride, the dispersed system has a direct impact on the product, PVC resin, and on the quality of its processing and products. Hydroxypropyl Methyl Cellulose helps to improve the thermal stability of resin and control the particle size distribution(in other words, adjust PVC density), and its amount accounts for 0.025% -0.03% of PVC production.

Tile cement mortar is used to attach tiles on concrete or block walls.

ETON HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material.It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

As one of the most important raw materials in tile adhesive, cellulose ether plays a crucial role in the performance of tile adhesive. The role of cellulose ether in tile adhesive is mainly manifested in thickening, water retention, delaying cement hydration, improving workability, improving anti-slip performance and rheology, plasticity and lubricating properties, extending open time, enhancing bond strength, etc.

Hydroxyethyl Methylcellulose (HEMC or MHEC) are excellent thickener and water retaining agents in construction industries for tile glue, grouts, skim coat, and cement render. Multiple grades and tailored formulation are available to suit various industrial needs。Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3HEMC Main applicationHydroxyethyl methyl cellulose (HEMC) is a non-ionic cellulose mixed ether made from cotton and wood through alkalization, ethylene oxide and methyl chloride etherification.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

HPS Main application1.food industry, used as thickener, suspending agent and adhesive.2.in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.3.in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving. Hydroxypropyl starch with high degree of substitution can be used as printing paste.4.pharmaceutical industry, used as ta

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.